[1]赵新辉,孙永国,于广滨.齿根过渡曲面对正交面齿轮弯曲强度影响[J].哈尔滨工程大学学报,2018,39(06):1066-1072.[doi:10.11990/jheu.201612080]
 ZHAO Xinhui,SUN Yongguo,YU Guangbin.The effect of tooth root transition surface on bending strength of orthogonal face gear[J].hebgcdxxb,2018,39(06):1066-1072.[doi:10.11990/jheu.201612080]
点击复制

齿根过渡曲面对正交面齿轮弯曲强度影响(/HTML)
分享到:

《哈尔滨工程大学学报》[ISSN:1006-6977/CN:61-1281/TN]

卷:
39
期数:
2018年06期
页码:
1066-1072
栏目:
出版日期:
2018-06-05

文章信息/Info

Title:
The effect of tooth root transition surface on bending strength of orthogonal face gear
作者:
赵新辉 孙永国 于广滨
哈尔滨理工大学 机械与动力工程学院, 黑龙江 哈尔滨 150080
Author(s):
ZHAO Xinhui SUN Yongguo YU Guangbin
School of Mechanical and Power Engineering, Harbin University of Science and Technology, Harbin 150080, China
关键词:
齿轮传动正交面齿轮齿廓方程圆角插齿刀齿根过渡曲面危险截面弯曲应力有限元分析
分类号:
TH132.41
DOI:
10.11990/jheu.201612080
文献标志码:
A
摘要:
为更加真实有效地分析正交面齿轮弯曲强度,本文推导了正交面齿轮齿面方程及齿根过渡曲面方程,构建了正交面齿轮的全部齿廓,并利用Pro/E软件分别生成了两种全齿廓正交面齿轮三维实体模型。基于内切抛物线理论分析论证了正交面齿轮的最大弯曲应力位置是在沿齿高方向齿面的上半部分而非齿根处。利用ANSYS软件分别对齿顶圆角和齿顶尖角插齿刀所切制的两种面齿轮三齿模型进行了弯曲强度分析。研究结果表明,齿顶圆角插齿刀所切制的齿根过渡曲面提高了正交面齿轮的弯曲强度。

参考文献/References:

[1] LITVIN F L. 齿轮几何学与应用理论[M]. 国楷, 叶凌云, 范琳, 等译. 上海:上海科学技术出版社, 2008:484-518.LITVIN F L. Gear geometry and applied theory[M]. GUO Kai, YE Lingyun, FAN Lin, et al. Trans. Shanghai:Shanghai Science and Technology Press, 2008:484-518.
[2] LITVIN F L, FUENTES A, ZANZI C, et al. Face-gear drive with spur involute Pinion:geometry, generation by a worm, stress analysis[J]. Computer methods in applied mechanics and engineering, 2002, 191(25/26):2785-2813.
[3] GUINGAND M, DE VAUJANY J P, JACQUIN C Y. Quasi-static analysis of a face gear under torque[J]. Computer methods in applied mechanics and engineering, 2005, 194(39/40/41):4301-4318.
[4] BARONE S, BORGIANNI L, FORTE P. Evaluation of the effect of misalignment and profile modification in face gear drive by a finite element meshing simulation[J]. Journal of mechanical design, 2004, 126(5):916-924.
[5] 朱如鹏, 潘升材, 高德平. 正交面齿轮传动中齿宽设计的研究[J]. 机械科学与技术, 1999, 18(4):566-567, 569.ZHU Rupeng, PAN Shengcai, GAO Deping. Study of the design of tooth width of right shaft angle face gear drive[J]. Mechanical science and technology, 1999, 18(4):566-567, 569.
[6] 朱如鹏, 高德平. 在面齿轮设计中避免根切和齿顶变尖的设计方法的研究[J]. 中国机械工程, 1999, 10(11):1274-1276.ZHU Rupeng, GAO Deping. Study on the method of avoiding dedendum undercutting and addendum pointing in face gear design[J]. China mechanical engineering, 1999, 10(11):1274-1276.
[7] 付自平. 正交面齿轮的插齿加工仿真和磨齿原理研究[D]. 南京:南京航空航天大学, 2006:89-95.FU Ziping. Research on the simulation of shaping process and grinding principle of orthogonal-shaft face gear[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2006:89-95.
[8] 李政民卿, 朱如鹏. 装配偏置误差对正交面齿轮传动接触特性的影响[J]. 航空学报, 2009, 30(7):1353-1360.LI Zhengminqing, ZHU Rupeng. Impact of assembly deflection error on contact characteristics of orthogonal face gear drive[J]. Acta aeronautica et astronautica sinica, 2009, 30(7):1353-1360.
[9] 李政民卿, 陈宏尚, 朱如鹏. 主要参数对面齿轮传动噪声辐射的影响分析[J]. 航空动力学报, 2015, 30(11):2803-2809.LI Zhengminqing, CHEN Hongshang, ZHU Rupeng. Influence predictions of base parameters on noise radiations of face gear drives[J]. Journal of aerospace power, 2015, 30(11):2803-2809.
[10] 沈云波, 方宗德, 赵宁, 等. 齿廓方向修形的斜齿面齿轮啮合特性研究[J]. 中国机械工程, 2008, 19(18):2219-2222.SHEN Yunbo, FANG Zongde, ZHAO Ning, et al. Meshing performance of modified face gear drive with helical pinion in the profile direction[J]. China mechanical engineering, 2008, 19(18):2219-2222.
[11] 崔艳梅, 方宗德, 王星. 考虑安装误差的弧线齿面齿轮承载接触分析[J]. 机械传动, 2015, 39(8):115-118.CUI Yanmei, FANG Zongde, WANG Xing. Load tooth contact analysis for arc tooth face gear considering assembly misalignment[J]. Journal of mechanical transmission, 2015, 39(8):115-118.
[12] 付学中, 方宗德, 李建华, 等. 面齿轮副小轮拓扑修形设计及啮合性能分析[J]. 哈尔滨工程大学学报, 2016, 37(9):1281-1286.FU Xuezhong, FANG Zongde, LI Jianhua, et al. Design of topological shape modification of auxiliary pinion of face gears and analysis of meshing performance[J]. Journal of Harbin Engineering University, 2016, 37(9):1281-1286.
[13] 袁俊哲, 刘华明. 刀具设计手册[M]. 北京:机械工业出版社, 1999:950-952.YUAN Junzhe, LIU Huaming. Tool design manual[M]. Beijing:China Machine Press, 1999:950-952.

相似文献/References:

[1]田兴,李威.少齿数非对称齿轮主动设计与温度场分析[J].哈尔滨工程大学学报,2013,(07):907.[doi:10067043.201210025]
[2]林小燕,魏静,赖育彬,等.齿轮的剩余强度模型及其动态可靠度[J].哈尔滨工程大学学报,2017,38(09):1476.[doi:10.11990/jheu.201605050]
 LIN Xiaoyan,WEI Jing,LAI Yubin,et al.Gear residual strength model and dynamic reliability[J].hebgcdxxb,2017,38(06):1476.[doi:10.11990/jheu.201605050]

备注/Memo

备注/Memo:
收稿日期:2016-12-21。
基金项目:科技部国际合作重大项目(2014DFB70120);黑龙江省杰出基金项目(JC2015013,JC2014020);黑龙江自然基金重点项目(ZD201309);哈尔滨市杰出青年基金项目(2015RAYXJ001).
作者简介:赵新辉(1990-),男,硕士研究生;于广滨(1978-),男,教授.
通讯作者:于广滨,E-mail:yu_ccna@163.com
更新日期/Last Update: 2018-06-01