[1]霍军周,杨静,孙伟,等.TBM刀盘支撑筋结构设计及静动态特性分析[J].哈尔滨工程大学学报,2014,(07):883-888.[doi:10.3969/j.issn.1006-7043.201305005]
 HUO Junzhou,YANG Jing,SUN Wei,et al.Structure design and static/dynamic analysis of TBM cutterhead supporting ribs[J].hebgcdxxb,2014,(07):883-888.[doi:10.3969/j.issn.1006-7043.201305005]
点击复制

TBM刀盘支撑筋结构设计及静动态特性分析
分享到:

《哈尔滨工程大学学报》[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2014年07期
页码:
883-888
栏目:
出版日期:
2014-07-25

文章信息/Info

Title:
Structure design and static/dynamic analysis of TBM cutterhead supporting ribs
作者:
霍军周 杨静 孙伟 张旭
大连理工大学 机械工程学院, 辽宁 大连 116024
Author(s):
HUO Junzhou YANG Jing SUN Wei ZHANG Xu
School of Mechanical Engineering, Dalian University of Technology, Dalian 116024, China
关键词:
全断面岩石掘进机刀盘支撑筋溜碴板静态分析动态分析
分类号:
TH69
DOI:
10.3969/j.issn.1006-7043.201305005
文献标志码:
A
摘要:
全断面岩石掘进机(TBM)刀盘支撑筋兼具溜碴与支撑的作用,设计了一种L形的刀盘支撑筋结构,建立了基于出碴性能的刀盘支撑筋结构理论计算模型。该模型根据具体复杂围岩边界条件和掘进控制参数来确定刀盘支撑筋的主要结构参数。以某型号TBM刀盘溜碴板处支撑筋设计问题为例,将改进的刀盘模型与传统刀盘结构进行对比,分析了刀盘的静、动态特性。结果表明:改进后的刀盘结构可以有效地降低刀盘盘面最大应力、变形和振动,改善振动特性,其中刀盘盘面总变形减小了3.23%,应力降低了3.5%,刀盘整体振动减小了12.35%。

参考文献/References:

[1] 张鹏. TBM滚刀布置与刀盘结构参数优化设计研究[D].大连:大连理工大学,2009:6.ZHANG Peng. Design and research on cutter layout and the structural parameters of the cutterhead optimization for TBM [D]. Dalian: Dalian University of Technology,2009:6.
[2] 夏毅敏,卞章括,暨智勇,等.复合式土压平衡盾构刀盘CAD系统开发[J].计算机工程与应用, 2012,48(36):64-69.XIA Yimin, BIAN Zhangkuo, JI Zhiyong, et al. Development of cutter head CAD system for composite EPB shield[J].Computer Engineering and Applications, 2012, 48(36):64-69.
[3] 谭青,张魁,夏毅敏,等.TBM刀具三维破岩仿真[J]. 山东大学学报,2009,12:72-77.TAN Qing, ZHANG Kui, XIA Yimin, et al. Three dimensional simulation of rock breaking by TBM cutter[J]. Journal of Shandong University, 2009,12:72-77.
[4] 苏翠侠,王燕群,蔡宗熙,等.盾构刀盘掘进载荷的数值模拟[J].天津大学学报,2011,6:522-528.SU Cuixia, WANG Yanqun, CAI Zongxi, et al. Numerical simulation of excavation load on cutterhead in shield tunneling machine[J]. Journal of Tianjin University, 2011,6:522-528.
[5] 苏翠侠,蔡宗熙,王燕群,等.基于数值仿真的盾构刀盘载荷影响因素分析[J].机械设计与研究, 2012,8:66-69.SU Cuixia, CAI Zongxi, WANG Yanqun, et al. Analysis of influence factors on load of shield cutterhead based on numerical simulation[J]. Machine Design and Research, 2012,8:66-69.
[6] 齐梦学,王雁军,李宏亮.敞开式掘进机全面整修技术研究与应用[J].现代隧道技术, 2009,8:64-70.QI Mengxue, WANG Yanjun, LI Hongliang. Research and application of overall refit of open type TBM[J]. Modern Tunnelling Technology, 2009,8:64-70.
[7] 李震,霍军周,孙伟,等.全断面岩石掘进机刀盘结构主参数的优化设计[J].机械设计与研究,2010,9:83-90.LI Zhen, HUO Junzhou, SUN Wei, et al. Cutterhead structure optimal design of the full-face rock tunnel boring machine[J]. Machine Design and Research, 2010,9:83-90.
[8] BALLING R J, SOBIESZCZANSKI S J. Optimization of coupled systems[J]. AIAA Journal, 1996,34(1):6-17.
[9] ZHAO J, GONG Q M, EISENSTEN Z. Tunneling through a frequency changing and mixed ground[J].Tunneling and Underground Space Technology, 2007,22:388-400.
[10] POTTER M A, De JONG K A.A cooperative coevolutionary approach to function optimization[C]//Proceedings of the Third Conference on Parallel Problem Solving from Nature. Jerusalem, 1994:249-257.
[11] PAREDIS J. Steps towards co-evolutionary classification neural networks[C]//The Proceedings of the Fourth International Workshop on the Synthesis and Simulation of Living Systems. Cambridge, USA,1994:102-108.
[12] PAREDIS J. Co-evolutionary constraint satisfaction[C]//The Proceedings of the Third Conference on Parallel Problem Solving from Nature 2. Berlin, 1994:46-55.
[13] HUSBANDS P. Distributed co-evolutionary genetic algorithms for multi criteria and multi constraint optimization [J].Lecture Notes in Computer Science, 1994, 865:150-165.
[14] 刘启山.岩石隧道掘进机(TBM)施工及工程实例[M].北京:中国铁道出版社, 2004:40.LIU Qishan. Rock tunnel boring machine (TBM) construction and engineering examples[M]. Beijing: China Railway Publishing House, 2004:40.

相似文献/References:

[1]霍军周,孙伟,郭莉,等.多滚刀顺次作用下岩石破碎模拟及刀间距分析[J].哈尔滨工程大学学报,2012,(01):96.[doi:doi:10.3969/j.issn.1007-7043.201011063]
 HUO Junzhou,SUN Wei,GUO Li,et al.Numerical simulation of the rock fracture process induced by multi-disc-cutters and cutter spacing design[J].hebgcdxxb,2012,(07):96.[doi:doi:10.3969/j.issn.1007-7043.201011063]
[2]霍军周,欧阳湘宇,王亚杰,等.重载冲击激励下TBM刀盘振动特性的影响因素分析[J].哈尔滨工程大学学报,2015,(04):555.[doi:10.3969/j.issn.1006-7043.201312008]
 HUO Junzhou,OUYANG Xiangyu,WANG Yajie,et al.Analysis of influencing factors of vibration behaviors of TBM cutterhead under heavy impact loads[J].hebgcdxxb,2015,(07):555.[doi:10.3969/j.issn.1006-7043.201312008]
[3]霍军周,杨静,孙伟,等.不同模式下TBM刀群三维回转切削仿真与优化设计[J].哈尔滨工程大学学报,2014,(11):1403.[doi:10.3969/j.issn.1006-7043.201307062]
 HUO Junzhou,YANG Jing,SUN Wei,et al.Simulation and optimization design of three-dimensional rotating cutting action of TBM cutter group with different modes[J].hebgcdxxb,2014,(07):1403.[doi:10.3969/j.issn.1006-7043.201307062]
[4]霍军周,孙晓龙,李广庆,等.滑动支撑的新型滚刀设计及其动态性能[J].哈尔滨工程大学学报,2015,(11):1509.[doi:10.11990/jheu.201407063]
 HUO Junzhou,SUN Xiaolong,LI Guangqing,et al.The structural design and dynamic characteristics of a new type of disc cutter under sliding support[J].hebgcdxxb,2015,(07):1509.[doi:10.11990/jheu.201407063]
[5]夏毅敏,杨妹,吴遁,等.TBM刀盘出碴槽结构对出碴效率的影响规律[J].哈尔滨工程大学学报,2018,39(09):1561.[doi:10.11990/jheu.201611091]
 XIA Yimin,YANG Mei,WU Dun,et al.Influence of the TBM mucking slots structure on the discharge characteristics of ballasts[J].hebgcdxxb,2018,39(07):1561.[doi:10.11990/jheu.201611091]
[6]夏毅敏,张小云,曾桂英,等.TBM滚刀刀圈轧制成形特性及其变化规律[J].哈尔滨工程大学学报,2019,40(02):374.[doi:10.11990/jheu.201708010]
 XIA Yimin,ZHANG Xiaoyun,ZENG Guiying,et al.Rolling characteristics and changing laws of TBM cutter ring[J].hebgcdxxb,2019,40(07):374.[doi:10.11990/jheu.201708010]
[7]夏毅敏,吴才章,兰浩,等.典型TBM刀盘力学性能分析与对比[J].哈尔滨工程大学学报,2016,37(08):1136.[doi:10.11990/jheu.201505040]
 XIA Yimin,WU Caizhang,LAN Hao,et al.Mechanical performance analysis and comparison of typical TBM cutterhead[J].hebgcdxxb,2016,37(07):1136.[doi:10.11990/jheu.201505040]

备注/Memo

备注/Memo:
收稿日期:2013-5-6;改回日期:。
基金项目:国家自然科学基金资助项目(51375001);国家973计划资助项目(2013CB035400);辽宁省科技攻关基金资助项目(2011220031);中央高校基本科研业务费专项基金资助项目(DUT13LK14).
作者简介:霍军周(1979-),男,副教授,博士.
通讯作者:霍军周,E-mail:huojunzhou@dlut.edu.cn.
更新日期/Last Update: 2015-06-19