[1]万云,童谷生,陈莘莘,等.低速冲击时冲击角度和摩擦对玻纤增强铝板性能的影响[J].哈尔滨工程大学学报,2018,39(05):897-901.[doi:10.11990/jheu.201611020]
 WAN Yun,TONG Gusheng,CHEN Shenshen,et al.Influence of impact angle and friction on the performance of glass fiber reinforced aluminum laminates (GLARE) under low-velocity impact[J].Journal of Harbin Engineering University,2018,39(05):897-901.[doi:10.11990/jheu.201611020]
点击复制

低速冲击时冲击角度和摩擦对玻纤增强铝板性能的影响(/HTML)
分享到:

《哈尔滨工程大学学报》[ISSN:1006-6977/CN:61-1281/TN]

卷:
39
期数:
2018年05期
页码:
897-901
栏目:
出版日期:
2018-05-05

文章信息/Info

Title:
Influence of impact angle and friction on the performance of glass fiber reinforced aluminum laminates (GLARE) under low-velocity impact
作者:
万云 童谷生 陈莘莘 魏星 黄永虎
华东交通大学 土木与建筑学院, 江西 南昌 330013
Author(s):
WAN Yun TONG Gusheng CHEN Shenshen WEI Xing HUANG Yonghu
School of Civil Engineer and Architecture, East China Jiaotong University, Nanchang 330013, China
关键词:
低速冲击玻纤金属板数值分析冲击响应冲击角度能量吸收摩擦
分类号:
TB331
DOI:
10.11990/jheu.201611020
文献标志码:
A
摘要:
为了研究在不同冲击角度和接触摩擦力受低速冲击载荷下玻璃纤维铝合金层合板破坏情况,本文结合VUMAT用户自定义子程序、Johnson-Cook损伤模型和基于表面接触行为的内聚力行为方法,建立了玻璃纤维增强铝合金层板(GLARE)低速冲击有限元模型。通过实验对比材料受低速冲击响应和材料损伤状况。结果表明:冲击角较小时材料损伤较小;减小摩擦系数能够减小材料冲击损伤,且减小幅度随着冲击角减小而增大;冲击角度和摩擦对材料冲击性能影响规律可以为类似结构设计提供参考。

参考文献/References:

[1] VLOT A. Impact properties of fibre metal laminates[J]. Composites engineering, 1993, 3(10):911-927.
[2] 马玉娥,胡海威,熊晓枫.低速冲击下FML、铝板和复材的损伤对比研究[J]. 航空学报, 2014, 35(7):1902-1911.MA Yu’e, HU Haiwei, XIONG Xiaofeng. Comparison of damage in fibre metal laminates, aluminium and composite panel subjected to low-velocity impact[J]. Acta aeronauticaet astronautica sinica, 2014, 35(7):1902-1911.
[3] 陈勇,庞宝君,郑伟,等. 纤维金属层板低速冲击实验和数值仿真[J]. 复合材料学报, 2014, 31(3):733-740.CHEN Yong, PANG Baojun, ZHENG Wei, et al. Experimental tests and numerical simulation on low velocity impact performance of fiber metal laminates[J]. Acta materiae composiae sinica, 2014, 31(3):733-740.
[4] 李晓峰,曲贵民,李博儒. 圆孔对GLARE层合板抗冲击性能的影响[J]. 复合材料学报, 2016, 33(9):2104-2113.LI Xiaofeng, QU Guimin, LI Boru. Effect of circular hole on impact resistance of GLARE laminates[J]. Acta materiae compositae sinica, 2016, 33(9):2104-2114.
[5] 赵士成, 王振清, 郭建明,等. 混杂方式对CF/GF/环氧混杂复合材料低速冲击性能的影响[J]. 哈尔滨工程大学学报, 2015, 36(11):1476-1480.ZHAO Shicheng, WANG Zhenqing, GUO Jianming, et al. Effect of hybrid style on the performance of CF/GF/epoxy hybrid composites subjected to low-velocity impact[J]. Journal of Harbin Engineering University, 2015, 36(11):1476-1480.
[6] SONG S H, BYUN Y S, KU T W, et al. Experimental and numerical investigation on impact performance of carbon reinforced aluminium laminates[J]. Journal of materials science & technology, 2010, 26(4):327-332.
[7] FAN J,GUAN Z W,CANTWELL W J.Numerical modelling of perforation failure in fiber-metal laminates subjected to low velocity impact loading[J]. Composite structures, 2011, 93(9):2430-2436.
[8] ASAEE Z, TAHERI F. Experimental and numerical investigation into the influence of stacking sequence on the low-velocity impact response of new 3D FMLs[J]. Composite structures, 2015, 140:136-146.
[9] FERRANTE L, SARASINI F, TIRLLÒ J, et al. Low velocity impact response of basalt-aluminium fibre metal laminates[J]. Materials & design, 2016, 98:98-107.
[10] SEYED Y A, LIU Y, LIAW B. Low-velocity impact on glare 5 fiber-metal laminates:influences of specimen thickness and impactor mass[J]. Journal of aerospace engineering, 2012, 25:409-420.
[11] 万云. 纤维增强金属层合板的拉伸和冲击性能研究[D]. 哈尔滨:哈尔滨工程大学, 2015.WAN Yun. Investigation of tensile and impact behavior of fibre metal laminate[D]. Harbin:Harbin Engineering University, 2015.
[12] JOHNSON G R, COOK W H. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures[C]//Proceedings of the Seventh International Symposium on Ballistics. The Hague, Netherland, 1983:541-547.
[13] KAY G.Failure modeling of titanium-61-4V and 2024-T3 aluminum with the Johnson-Cook Material Model[R]. U. S:Department of Energy, 2002:1-25.
[14] LESUER D.Experimental investigations of material models for Ti-6AL4V and 2024-T3[R]Washingtion, D.C:U. S:Department of Energy, 1999.
[15] HASHIN Z.Failure criteria for unidirectional fiber composites[J]. Journal of Applied Mechanics, 1980, 47(2):329-334.
[16] TAN S C.A progressive failure model for composite laminates containing opening[J]. Journal of composite, 1991, 25(5):556-577.
[17] BARENBLATT G I. The formation of equilibrium cracks during brittle fracture:General ideas and hypotheses, axially-symmetric cracks[J]. Applied mathematics and mechanics, 1959, 23(3):622-636.
[18] DUGDALE D S. Yielding of steel sheets containing slits[J]. Journal of mechanics of physics and solids, 1960, 8(2):100-104.
[19] 王振清,雷红帅,周博,等.基于内聚力模型的形状记忆合金短纤维增强树脂基复合材料的模拟分析[J]. 复合材料学报, 2012, 29(5):236-243.WANG Zhenqing, LEI Hongshuai, ZHOU Bo, et al. Simulation and analysis on short-cut shape memory alloy reinforced epoxy composite based on cohesive one model[J]. Acta materiae compositae sinica, 2012, 29(5):236-243.
[20] 童谷生. FRP-混凝土粘结系统界面强度模型评估及其改进[J]. 华东交通大学学报, 2015(6):54-60.TONG Gusheng. Evaluation and improvement on interface bond strength model of FRP-concrete bond system[J]. Journal of East China Jiaotong University, 2015, 32(6):54-60.
[21] 童谷生, 赖泽坤. 基于有限断裂力学的FRP-混凝土界面粘结强度研究[J]. 华东交通大学学报, 2017, 34(4):13-21.TONG Gusheng, LAI Zekun. Bond strength analysis of FRP-concrete interface based on finite fracture mechanics[J]. Journal of East China Jiaotong University, 2017, 34(4):13-21.
[22] 万云, 章继峰, 周利民,等. 玻璃纤维铝合金板低速冲击损伤演化数值模拟[J]. 华中科技大学学报(自然科学版), 2015(2):94-97.WAN Yun, ZHANG Jifeng, ZHOU Limin, et al. Numerical simulation of damage evolution on low-velocity impact of glass fiber reinforce aluminum laminates[J]. Journal of Huazhong University of Science and Technology (natural science edition), 2015(2):94-97.

相似文献/References:

[1]赵士成,王振清,郭建明,等.混杂方式对CF/GF/环氧混杂复合材料低速冲击性能的影响[J].哈尔滨工程大学学报,2015,(11):1476.[doi:10.11990/jheu.201410061]
 ZHAO Shicheng,WANG Zhenqing,GUO Jianming,et al.Effect of hybrid style on the performance of CF/GF/epoxy hybrid composites subjected to low-velocity impact[J].Journal of Harbin Engineering University,2015,(05):1476.[doi:10.11990/jheu.201410061]
[2]万云,杨海龙,周双喜,等.缺陷对纤维金属层板低速冲击性能影响规律[J].哈尔滨工程大学学报,2020,41(7):1022.[doi:10.11990/jheu.201901033]
 WAN Yun,YANG Hailong,ZHOU Shuangxi,et al.Influence of flaw on the low-velocity impact resistance performance of glass fiber reinforced aluminum laminates (GLARE)[J].Journal of Harbin Engineering University,2020,41(05):1022.[doi:10.11990/jheu.201901033]

备注/Memo

备注/Memo:
收稿日期:2016-11-04。
基金项目:国家自然科学基金项目(11462005);江西省重点研发计划项目(20071BBE50024);江西省教育厅基金青年项目(GJJ170395).
作者简介:万云(1985-),讲师,博士.
通讯作者:万云,E-mail:wanyun0505@163.com.
更新日期/Last Update: 2018-05-19