[1]李瑞,孟祥慧.粘温效应对十字头滑块与活塞裙润滑影响分析[J].哈尔滨工程大学学报,2019,40(12):1980-1985.[doi:10.11990/jheu.201812083]
　LI Rui,MENG Xianghui.Influence of temperature on lubricant viscosity in the crosshead slipper and piston skirt[J].Journal of Harbin Engineering University,2019,40(12):1980-1985.[doi:10.11990/jheu.201812083]

点击复制

粘温效应对十字头滑块与活塞裙润滑影响分析(/HTML)

分享到：

参考文献/References:

[1] QASIM S A, CHAUDHRI U F, MALIK M A. Analyzing viscoelastic effects in piston skirts EHL at small radial clearances in initial engine start up[J]. Tribology international, 2012, 45(1):16-29.
[2] MENG Xianghui, XIE Youbai. A new numerical analysis for piston skirt-liner system lubrication considering the effects of connecting rod inertia[J]. Tribology international, 2012, 47:235-243.
[3] MENG Xianghui, FANG Congcong, XIE Youbai. Transient tribodynamic model of piston skirt-liner systems with variable speed effects[J]. Tribology international, 2016, 94:640-651.
[4] GUNELSU O, AKALIN O. The effects of piston skirt profiles on secondary motion and friction[J]. Journal of engineering for gas turbines and power, 2014, 136(6):062503.
[5] 孙军, 刘广胜, 苗恩铭, 等. 内燃机活塞裙部-缸套间润滑油输送状况[J]. 机械工程学报, 2016, 52(22):138-145.SUN Jun, LIU Guangsheng, MIAO Enming, et al. Transport of lubricating oil between piston skirt and cylinder liner for internal combustion engine[J]. Journal of mechanical engineering, 2016, 52(22):138-145.
[6] 宁李谱, 王立新. 曲轴偏置对活塞裙部混合润滑特性的影响[J]. 汽车工程, 2018, 40(5):597-604.NING Lipu, WANG Lixin. Effects of crankshaft offset on the mixed lubrication characteristics of piston skirt[J]. Automotive engineering, 2018, 40(5):597-604.
[7] 吕延军, 李猛, 张永芳, 等. 轮廓参数对活塞二阶运动和裙部润滑性能的影响研究[J]. 机械工程学报, 2018, 54(15):100-116.LYU Yanjun, LI Meng, ZHANG Yongfang, et al. Effect of piston skirt profile parameter on secondary motion and lubrication performance of piston[J]. Journal of mechanical engineering, 2018, 54(15):100-116.
[8] ABANTERIBA S. The analysis of the lubrication condition and friction losses of a single acting cross head guide shoe of a low speed cross head diesel engine:Part I-An alogrithm for the prediction of oil film thickness[J]. Tribology transactions, 2000, 43(4):665-670.
[9] ABANTERIBA S. The analysis of the lubrication condition and friction losses of a single acting cross head guide shoe of a low speed cross head diesel engine:Part II-A practical model for the determination of the oil film thickness[J]. Tribology transactions, 2000, 43(4):847-851.
[10] ABANTERIBA S. The analysis of the lubrication condition and friction losses of a single acting cross head guide shoe of a low speed cross head diesel engine:Part III-Friction and its minimization[J]. Tribology transactions, 2000, 43(4):830-836.
[11] LI Rui, MENG Xianghui, XIE Youbai. A new coupling tribodynamic model of crosshead slipper-guide system and piston skirt-liner system of low-speed marine diesel engines[J]. Tribology international, 2018, 117:189-205.
[12] PATIR N, CHENG H S. Application of average flow model to lubrication between rough sliding surfaces[J]. Journal of lubrication technology, 1979, 101(2):220-229.
[13] WU Chengwei, ZHENG Linqing. An average reynolds equation for partial film lubrication with a contact factor[J]. Journal of tribology, 1989, 111(1):188-191.
[14] GREENWOOD J A, TRIPP J H. The contact of two nominally flat rough surfaces[J]. Proceedings of the institution of mechanical engineers, 1970, 185(1):625-633.
[15] FANG Congcong, MENG Xianghui, KONG Xiaoli, et al. Transient tribo-dynamics analysis and friction loss evaluation of piston during cold-and warm-start of a SI engine[J]. International journal of mechanical sciences, 2017, 133:767-787.